Material: Rosewood outer, inner cedar wood
Capacity: 40-80 cigars
Production process: Traditional crafts, tenon joint structure
Warranty: Two years the world's Lien

Cigar-box use and maintenance

Calibration (requires calibration in order to use)
1. Take a shallow dish put a teaspoon of refined table salt, add water to the extent there bit by bit you can.
2. The plate above, together with the hygrometer placed in a sealed plastic bag, do not get water on the hygrometer.
3. To ensure that there are air bags, static discharge for 6 hours.
4. Then check the hygrometer, it should appear in about 75%. If we do not, a number of hygrometer behind a small snail anhydride, allows you to calibration;
If there is no calibration screw, a note of this difference, after their addition and subtraction mental arithmetic.

Installation
Hygrometer is not specifically requested on the cigar boxes are positioned, you can conveniently. However, the hygrometer is best around the ventilation in order to ensure an accurate count. The best cigar box lid is placed at the top (usually a fixed slot of a circle in order to be there is better)
Humidor
1. Removed from the cigar box humidors. Note: Do not box in the cigar humidor with water to avoid getting wet cigar box.
2. Humidor Cigar box plus distilled water or preservative solution. Note: Never add water.
3. From the Humidor of the grille to add distilled water, for the first time it is recommended that the maintenance fluid with cigar boxes.
4. Do not over-water, wet, but do not soak.
5. Using blocks of a clean dry cloth outside the water, will be fixed in cigar humidor box, usually the same as with the hygrometer inside the lid on the cigar.
Cigars and maintenance solution (50% propylene glycol +50% distilled water)
Maintenance of Liquid's main role is to ensure that around 70% humidity and prevent mildew Humidor. Do not over-or frequently used. Moisture is usually the initial opening of boxes and a sudden drop in humidity circumstances that need. The normal every 3-6 months (depending on external temperature of the decision) plus 1 can (normal evaporation need so much time). Frequent use will affect the moisture absorbent and moisture-box functionality.

Enable
In the first, before a wooden cigar boxes need to absorb moisture, in order to ensure proper opening, please follow the following steps:
1. In the cigar box cigar box placed cups of distilled water or preservative solution.
2. The fine tuning of the hygrometer, humidifiers also be fixed into the cigar box.
3. Covered with lid, 8 hours after the inspection. Take a look at whether the humidity range of 68% -72%.
Note: Do not wet cigar box inside.

Maintenance
When used in cigar box, then you can save the cigars for several years.
1. Do not bump against the surface of cigar box, box above, and do not put anything.
2. Do not let direct sunlight in order to avoid deformation of cigar box and lose moisture function.
3. Maintenance of the surface of cigar boxes, brightener, Ning lemon oil should first be placed on a soft cloth, rubbing Zaiqu cigar boxes, cigar boxes can not be placed directly.
4. Do not use bleach or acidic substances come into contact with the inside and outside boxes.
5. Can be gently sucked on a regular basis inside the cigar box Suimo.